high speed precision lathe:FL-S430,S480, S530,M560,M660 series
FL-S480
MODEL | FL-1216GH | FL-1224GH | FL-1236GH | FL-1324GH | FL-1336GH | FL-1340GH |
NOMINAL SIZE | ||||||
Swing over bed | 305mm (12”) | 330mm (13”) | ||||
Swing over cross slide | 153mm (6”) | 165mm (6-1/2”) | ||||
Swing in gap | 461mm (18-1/8”) | 486mm (19-1/8”) | ||||
Gap length in front of face plate | 122mm (4-3/4”) | |||||
Distance between centers | 406mm (16”) | 609mm (24”) | 915mm (36”) | 609mm (24”) | 915mm (36”) | 1000mm (40”) |
SPINDLE | ||||||
Hole through spindle | 40mm (1-9/16”) | |||||
Taper of spindle bore | M.T.No.5 | |||||
Taper of center | M.T.No.3 | |||||
No. & range of spindle speeds | 12 Nos. 70-1400 r.p.m. | |||||
Spindle nose | D1-4 | |||||
THREADS & FEEDS | ||||||
Dia. & pitches of lead screw | 22mmx4mm (Metric) or 7/8x8 T.P.I. (Inch) | |||||
Number of threads for Metric lead screw | 24(Metric), 39 (Inch) | |||||
Range of pitches for Metric lead screw | 0.25-7mm (Metric), 3 1/2-104 T.P.I. (Inch) | |||||
Number of threads for Inch lead screw | 24 (Metric), 40 (Inch) | |||||
Range of threads for Inch lead screw | 0.25-7.5mm (Metric), 4-112 T.P.I. (Inch) | |||||
TOOL SLIDE | ||||||
Cross slide travel | 170mm (6-3/4”) | |||||
Compound rest travel | 90mm (3-1/2”) | |||||
Max. size cutting tool | 16mmx16mm (5/8”x5/8”) | |||||
TAILSTOCK | ||||||
Dia. & travel of quill | Ø40mm (1-9/16”) & 100mm (4”) | |||||
Taper of quill | M.T. No. 3 | |||||
BED | ||||||
Width of bed | 190mm (7-1/2”) | |||||
MACHINE | ||||||
Floor space (L x W x H) | 1140x635 x584 mm | 1290x635 x584 mm | 1670x635 x584 mm | 1290x635 x597mm | 1670x635 x597 mm | 1770x635 x597 mm |
Net weight | 260kgs | 280kgs | 310kgs | 280kgs | 310kgs | 320kgs |
MOTOR | ||||||
Motor | 1 1/2HP | |||||
PACKING | ||||||
Packing size (L x W x H) | 1270x750 x750mm | 1420x750 x750mm | 1780x750 x750mm | 1420x750 x750mm | 1780x750 x750mm | 1855x750 x750mm |
Gross weight | 310kgs | 330kgs | 370kgs | 330kgs | 370kgs | 380kgs |
Download Catalog
MODEL | FL-1324E | FL-1424E | FL-1340E | FL-1440E |
Swing over bed | 330mm(13") | 360mm(14") | 330mm(13") | 360mm (14") |
Swing over cross slide | 195mm (7-5/8") | 225mm(8-3/4") | 195mm(7-5/8") | 225mm (8-3/4") |
Distance between centers | 600mm(24") | 1000mm(40") | ||
Swing over gap | 490mm(19-1/4") | 520mm(20-3/4") | 490mm(19-1/4") | 520mm(20-3/4") |
Width of bed | 190mm(7-9/16”) | |||
Number of spindle speeds | 9 | |||
Range of spindle speeds | 82-2000R.P.M. | |||
Hole through spindle | 40mm(1-1/2") | |||
Spindle nose | D1-4 Camlock | |||
Taper of spindle bore | M.T.No.5 | |||
Main motor | 2HP, 1ph, or 3HP, 3ph | |||
Tailstock quill taper | M.T.No.3 | |||
Tailstock quill travel | 100mm(4") | |||
Cross slide travel | 165mm(6-1/2") | |||
Compound rest travel | 100mm(4") | |||
Metric threads | (30)0.4-7.0MM | |||
Inch threads | (32)4-56 T.P.I. | |||
Longitudinal feeds | 0.068-0.936mm/rev.(0.0026"-0.0638"/rev.) | |||
Cross feeds | 0.034-0.468mm/rev. (0.0013"-0.0319"/rev.) | |||
Machine net weight | 580kgs(1276 lbs) | 600kgs(1320 lbs) | 600kgs(1320 lbs) | 620kgs(1364 lbs) |
Machine gross weight | 660kgs(1452 lbs) | 700kgs(1540 lbs) | 700kgs(1540 lbs) | 720kgs(1584 lbs) |
Case dimension LxWxH | 1473x762x1473mm(58"x30"x58") | 1855x762x1473mm(73"x30"x58") |
Download Catalog
MODEL | FL-V430 | FL-V480 | FL-V530 | ||||
560 | 760 | 1000 | 1500 | 2200 | |||
Swing over bed | 430mm(16-7/8") | 470mm(18-1/2") | 520mm(20-7/16") | ||||
Swing over cross slide | 240mm(9-7/16") | 280mm(11") | 330mm(12-15/16") | ||||
Center height | 215mm(8.465") | 235mm(9.252") | 260mm(10.236") | ||||
Distance between centers | 510mm(20") | 690mm(27-1/8") | 940mm(37") | 1440mm (56-5/8") | 2200mm(86-1/2") | ||
Swing over gap | 650mm(25-9/16") | 690mm(27-1/8") | 740mm(29-1/8") | ||||
Bed width | 300mm(11.811") | ||||||
Spindle nose | ASA D1-6/D1-8(opt.) | ASA D1-8 | |||||
Spindle bore | 58mm(2.283") / 80mm(3.150")(opt.) | 80mm(3.150") | |||||
Taper of spindle bore | MT 6 / MT7(opt.) | ||||||
Spindle speed | 20~2000r.p.m.(stepless) | ||||||
Inch threads range | 4~56 T.P.I. | ||||||
Metric threads range | P 0.5~7mm | ||||||
Longitudinal feeds range | 0.05~0.82mm(0.002~0.032") | ||||||
Cross feeds range | 0.02~0.4mm(0.001~0.0094") | ||||||
Leadscrew diameter | 35mm(1.378") | ||||||
Leadscrew pitch | 4 T.P.I. or 6 mm | ||||||
Taper of tailstock center | MT 4 | ||||||
Tailstock quill travel | 150mm(5-7/8") | ||||||
Tailstock quill diameter | 58mm(2.283") | 68mm(2.677") | |||||
Main drive motor | 7.5HP(5.625KW) | ||||||
Coolant pump | 1/8HP(0.1KW) | ||||||
Compound rest travel | 125mm(4-7/8") | ||||||
Cross slide travel | 245mm(9-5/8") | 275mm(10-13/16") | |||||
Net weight (kgs) | 1500 / 1680 / 1760/ 2050 / 2405 | 1540 / 1720 / 1800/ 2075 / 2465 | 1580 / 1760 / 1810 /2135 / 2525 |
Download Catalog
MODEL | FL-680 | FL-780 | FL-880 | FL-980 |
1100G 1600G 2000G 2500G 3000G 3500G4000G 5000G 6000G 7000G 8000G | ||||
CAPACITY | ||||
Swing over bed | 680mm | 780mm (30-7/8") | 880mm (34-3/4") | 980mm (38-9/16") |
Swing over cross slide | 440mm | 540mm (21-1/4") | 640mm (25-1/4") | 740mm (29-1/8") |
Swing in gap x width of gap | 970x482mm (38-1/8"x19") | 1070x482mm (42-1/8"x19") | 1170x482mm (46"x19") | 1270x482mm (50"x19") |
Distance between centers | 1100 1600 2000 2500 3000 3500 | |||
Height of center (over bed) | 340mm (13-3/8") | 390mm (15-3/8") | 440mm (17-3/8") | 490mm (19-5/16") |
Bed width | 458mm (18") | |||
HEADSTOCK | ||||
Spindle nose | A2-11(or D1-11)(Ø105 / 155mm bore) or A2-15(Ø230mm bore),(opt.) | |||
Spindle bore | 105mm(4-1/8") or 155mm(6-1/16"),(opt.) or 230mm(9") (for FL-880/980 only),(opt.) | |||
Number of spindle speed | 12 | |||
Range of spindle speed | 12, 20, 29, 40, 55, 85, 120, 175, 300, 445, 650, 1000 r.p.m. (Ø105mm bore) or 10, 17, 25, 36, 47, 70, 100, 150, 245, 370, 540, 800 r.p.m. (Ø155mm bore)(opt.) | |||
FEEDS-THREAD | ||||
Lead screw dia. | 45mm (1-3/4") | |||
Number of feed changes | 28 | |||
Longitudinal feed range | 0.05~0.7 mm/rev. | |||
Cross feed range | 0.025~0.35 mm/rev. | |||
Inch threads | 2~28 T.P.I. (36) | |||
Metric threads | 0.8~14 mm (65) | |||
D.P no./ range | 4~56 D.P. (36) | |||
Module pitch no./ range | 0.5~7 M.P.(22) | |||
TOOL SLIDE | ||||
Cross slide travel | 390mm (15-3/8") | |||
Compound rest travel | 240mm (9-1/2") | |||
TAILSTOCK | ||||
Spindle travel | 210mm (8-1/4") | |||
Spindle diameter | 105mm (4-1/8") | |||
Taper of center | M.T. #6 | |||
MOTOR | ||||
Main motor | 15HP/4P or 20HP/4P (opt.) | |||
Rapid feed motor | 1/4 HP | |||
BED | ||||
Coolant pump | 1/8HP | |||
Length | 1100Gx2750mm 1600Gx3250mm 2000Gx3750mm 2500Gx4250mm | |||
Base width | 1240mm(48-13/16") | |||
Height | 1350mm(53-1/8") | 1400mm(55-1/8") | 1450mm(57") | 1500mm(59") |
N.W. | 1100Gx3300kgs 1600Gx3600kgs 2000Gx3900kgs 2500Gx4200kgs 3000Gx4500kgs 3500Gx4800kgs 4000Gx5100kgs 5000Gx6300kgs 6000Gx7000kgs 7000Gx7700kgs 8000Gx8400kgs | |||
G.W. | 1100Gx3450kgs 1600Gx3800kgs 2000Gx4150kgs 2500Gx4500kgs 3000Gx4850kgs 3500Gx5200kgs 4000Gx5600kgs 5000Gx7000kgs 6000Gx7700kgs 7000Gx8400kgs 8000Gx9200kgs | |||
Packing size (L) | 1100Gx2850mm 1600Gx3350mm 2000Gx3850mm 2500Gx4440mm 3000Gx4870mm 3500Gx5370mm 4000Gx5870mm 5000Gx6870mm 6000Gx7880mm 7000Gx8890mm 8000Gx9900mm | |||
Packing size (W) | 1660mm(65-3/8") | |||
Packing size (H) | 1550mm(61") | 1600mm(63") | 1650mm(65") | 1700mm(66-15/16") |
Download Catalog
MODEL | FL-V680 | FL-V780 | FL-V880 | FL-V980 |
1100G 1600G 2000G 2500G 3000G 3500G4000G 5000G 6000G 7000G 8000G | ||||
CAPACITY | ||||
Swing over bed | 680mm | 780mm (30-7/8") | 880mm (34-3/4") | 980mm (38-9/16") |
Swing over cross slide | 440mm | 540mm (21-1/4") | 640mm (25-1/4") | 740mm (29-1/8") |
Swing in gap x width of gap | 970x482mm (38-1/8"x19") | 1070x482mm (42-1/8"x19") | 1170x482mm (46"x19") | 1270x482mm (50"x19") |
Distance between centers | 1100 1600 2000 2500 3000 3500 | |||
Height of center (over bed) | 340mm (13-3/8") | 390mm (15-3/8") | 440mm (17-3/8") | 490mm (19-5/16") |
Bed width | 458mm (18") | |||
HEADSTOCK | ||||
Spindle nose | A2-11(or D1-11)(Ø105 / 155mm bore) or A2-15(Ø230mm bore),(opt.) | |||
Spindle bore | 105mm(4-1/8") or 155mm(6-1/16"),(opt.) or 230mm(9") (for FL-880/980 only),(opt.) | |||
Number of spindle speed | - | |||
Range of spindle speed | Ø105mm - 25~70 r.p.m. / 60~160 r.p.m. / 145~380 r.p.m. / 320~1000 r.p.m. | |||
FEEDS-THREAD | ||||
Lead screw dia. | 45mm (1-3/4") | |||
Number of feed changes | 28 | |||
Longitudinal feed range | 0.05~0.7 mm/rev. | |||
Cross feed range | 0.025~0.35 mm/rev. | |||
Inch threads | 2~28 T.P.I. (36) | |||
Metric threads | 0.8~14 mm (65) | |||
D.P no./ range | 4~56 D.P. (36) | |||
Module pitch no./ range | 0.5~7 M.P.(22) | |||
TOOL SLIDE | ||||
Cross slide travel | 390mm (15-3/8") | |||
Compound rest travel | 240mm (9-1/2") | |||
TAILSTOCK | ||||
Spindle travel | 210mm (8-1/4") | |||
Spindle diameter | 105mm (4-1/8") | |||
Taper of center | M.T. # 6 | |||
MOTOR | ||||
Main motor | 15HP/4P or 20HP/4P (opt.) | |||
Rapid feed motor | 1/4 HP | |||
BED | ||||
Coolant pump | 1/8HP | |||
Length | 1100Gx2750mm 1600Gx3250mm 2000Gx3750mm 2500Gx4250mm | |||
Base width | 1240mm(48-13/16") | |||
Height | 1350mm(53-1/8") | 1400mm(55-1/8") | 1450mm(57") | 1500mm(59") |
N.W. | 1100Gx3300kgs 1600Gx3600kgs 2000Gx3900kgs 2500Gx4200kgs 3000Gx4500kgs 3500Gx4800kgs 4000Gx5100kgs 5000Gx6300kgs 6000Gx7000kgs 7000Gx7700kgs 8000Gx8400kgs | |||
G.W. | 1100Gx3450kgs 1600Gx3800kgs 2000Gx4150kgs 2500Gx4500kgs 3000Gx4850kgs 3500Gx5200kgs 4000Gx5600kgs 5000Gx7000kgs 6000Gx7700kgs 7000Gx8400kgs 8000Gx9200kgs | |||
Packing size (L) | 1100Gx2850mm 1600Gx3350mm 2000Gx3850mm 2500Gx4440mm 3000Gx4870mm 3500Gx5370mm 4000Gx5870mm 5000Gx6870mm 6000Gx7880mm 7000Gx8890mm 8000Gx9900mm | |||
Packing size (W) | 1660mm(65-3/8") | |||
Packing size (H) | 1550mm(61") | 1600mm(63") | 1650mm(65") | 1700mm(66-15/16") |
Download Catalog
MODEL | FL-X860 | FL-X960 | FL-X1060 | |||||||
1810 | 2310 | 3310 | 4310 | 5310 | 6310 | 7310 | 8310 | |||
Swing over bed | 860mm(33-13/16") | 960mm(37-3/4") | 1060mm(41-11/16") | |||||||
Swing over cross slide | 625mm(24-9/16") | 725mm(28-1/2") | 825mm(32-7/16") | |||||||
Distance between centers | 1810mm (71-1/4") | 2310mm (90-7/8") | 3310mm (130-1/4") | 4310mm (169-5/8") | 5310mm (209") | 6310mm (248-3/8") | 7310mm (287-3/4") | 8310mm (327-1/8") | ||
Swing over gap | 1180mm(46-7/16") | 1280mm(50-3/8") | 1370mm(53-15/16") | |||||||
Gap length | 475mm(18.700") | |||||||||
Bed width | 510mm(20.079") | |||||||||
Spindle nose | A2-11 / A2-15(opt.) | |||||||||
Spindle bore | 158mm(6.220") / 230mm(9.055")(opt.) | |||||||||
Taper of spindle bore | MT 7 / 1/20(opt.) | |||||||||
Spindle speed | 8~680r.p.m.(12 steps)/6~500r.p.m.(12 steps)(opt.) | |||||||||
Inch threads range | 2~28 T.P.I. | |||||||||
Metric threads range | P 0.8~14mm | |||||||||
Longitudinal feeds range | 0.05~0.07mm/rev. | |||||||||
Cross feeds range | 0.025~0.35mm/rev. | |||||||||
Leadscrew diameter | 45mm(1.772") | |||||||||
Leadscrew pitch | 2 T.P.I./P 12mm(opt.) | |||||||||
Taper of tailstock center | MT 6 | |||||||||
Tailstock quill travel | 290mm(11-3/8") | |||||||||
Tailstock quill diameter | 120mm(4.724") | |||||||||
Main drive motor | 20 HP / 30 HP(opt.) | |||||||||
Coolant pump | 1/8 HP (0.1KW) | |||||||||
Compound rest travel | 330mm(13") | |||||||||
Cross slide travel | 520mm(20-7/16") | |||||||||
Net weight (kgs) (approx.) (FL-X860) | 5700 | 6100 | 6800 | 7600 | 8400 | 9200 | 10000 | 10800 |
Download Catalog
MODEL | FL-2480SSM | FL-24120SSM | FL-24160SSM | FL-3080SSM | FL-30120SSM | FL-30160SSM |
NOMINAL SIZE | ||||||
Swing over bed | 610mm (24") | 760mm(30") | ||||
Swing over Cross Slide | 350mm (13-3/4") | 500mm (19") | ||||
Height of Center | 305mm (12") | 380mm (15") | ||||
Distance Between Centers | 2033mm(80") | 3050mm(120") | 4050mm(160") | 2033mm(80") | 3050mm(120") | 4050mm(160") |
BED | ||||||
Width of Bedways | 485mm(19") | |||||
Total Length of Bed | 3320mm (130") | 4380mm(172") | 5470mm(215") | 3320mm(130") | 4380mm(172") | 5470mm(215") |
Swing over gap | 820mm (32-1/4") | 970mm (38-1/4") | ||||
Length of gap | 515mm(20-1/4") | |||||
Width in front of face plate | 340mm(13-3/8") | |||||
SPINDLE | ||||||
Spindle nose mounting | D1-11 CAMLOCK | |||||
Spindle bore | 105mm (4-1/8") | |||||
Taper of spindle bore | M.T.#5 (with center sleeve) | |||||
Number of spindle speeds | 18 steps (Forwarded & Reversed by magnetic clutch control) | |||||
Range of spindle speeds | 10-1200 R.P.M. (with Magnetic brake) | |||||
TOOL SLIDE | ||||||
Total travel of cross slide | 375mm(14-3/4") | |||||
Total travel of top slide | 225mm(9") | |||||
Max. size cutting tool | 28mm(1-1/8") | |||||
TAILSTOCK | ||||||
Total travel of tailstock barrel | 195mm (6-5/8") | |||||
Taper in tailstock barrel | M.T.#5 | |||||
Diameter of barrel | 80mm(3-1/8") | |||||
THREADS | ||||||
Lead screw diameter & pitch | Dia. 38mm Pitch 12mm 2 T.P.I. | |||||
Inch threads | 1/4~80 TPI (60) | |||||
Metric pitches | 0.2~112 mm (60) | |||||
Diametric pitches | 1~240 D.P.(55) | |||||
Module pitches | 0.05~28 M.P.(55) | |||||
FEEDS | ||||||
Feed rod diameter | 38mm(1-1/2") | |||||
Range of longitudinal feeds | 0.040~5.000mm / rev.0.0015~0.20 in/rev.(40) | |||||
Range of cross feeds | 0.015-4.000mm / rev.0.0006-0.15 in/rev. | |||||
MOTOR | ||||||
Main spindle motor | 15HP (11kw) | |||||
Coolant pump motor | 1/8HP (0.1kw) | |||||
WEIGHT | ||||||
Machine net weight | 3500kgs | 4000kgs | 4500kgs | 3800kgs | 4300kgs | 4800kgs |
11 Comments
dobry sklep
Wow, incredible weblog layout! How lengthy have you ever been running a blog for?
you make blogging look easy. The entire look of your site is excellent, as
smartly as the content material! You can see similar here
najlepszy sklep
dobry sklep
I want to to thank you for this good read!! I absolutely enjoyed every bit of it.
I have you book marked to look at new stuff you post… I saw similar here: Sklep internetowy
najlepszy sklep
Good day! Do you know if they make any plugins to help with SEO?
I’m trying to get my blog to rank for some targeted keywords but I’m not seeing
very good gains. If you know of any please share.
Kudos! You can read similar text here: Sklep
Analytical Agency
It’s very interesting! If you need help, look here: ARA Agency
dobry sklep
Hey! Do you know if they make any plugins
to assist with Search Engine Optimization? I’m trying to get my blog to rank for some targeted keywords but I’m not
seeing very good results. If you know of any please share.
Many thanks! You can read similar text here: E-commerce
e-commerce
Hi there! Do you know if they make any plugins to
assist with Search Engine Optimization? I’m trying to get my blog to rank for
some targeted keywords but I’m not seeing very good gains.
If you know of any please share. Appreciate it! You can read similar
art here: Najlepszy sklep
Backlink Building
Howdy! Do you know if they make any plugins to assist with SEO?
I’m trying to get my website to rank for some targeted keywords but I’m not seeing very good success.
If you know of any please share. Thank you! I saw similar article here: Link Building
synthroid price
average cost of synthroid
https://silvoria.shop
Wow, wonderful blog layout! How long have you ever been running a blog for?
you made running a blog look easy. The total look
of your site is excellent, as smartly as the content! You can see similar here e-commerce
synthroid 50
synthroid 0.05mg cost
where to buy synthroid 1mg in canada
generic synthroid cost